CR9506 HF Reader
CR5011A 13.56Mhz NFC TYPE A HF RFID Reader, Contactless NFC RFID Reader
MIFARE® 1k/4K, UltraLight ,ULTRALIGHT C, MIFARE® PLUS , MIFARE® Desfire
NTAG203,NTAG213 ,NTAG215,NTAG216
25TB512 ,25TB04K,25TB176
Application scopes
- e-Government
- Banking & Payment
- Access Control Time Attendance
- Network Security
- e-Purse & Loyalty
- Transportation
- Kiosk
- Intelligent Meters
Technical Specification
- Power supply:4.5V--5.5V, 40-105mA
- Interface: USB Virtual RS232, RS232 or TTL232
- Transmission speed: Default 19200 bps
- R/W distance of up to 100mm (up to 100mm with bigger antenna size), depending on TAG
- Storage temperature: -40 ºC ~ +85 ºC
- Operating temperature: -30ºC ~ +70 ºC
- ISO14443A ISO14443B ISO15693
CR9506 Reader High quality RFID IC ST25R3911 and STM32G070 MCU
RFID Chip Features
- ISO 18092 (NFCIP-1) Active P2P
- ISO14443A, ISO14443B, ISO15693 and FeliCa™
- Automatic antenna tuning system providing tuning of antenna LC tank
- Automatic modulation index adjustment
- AM and PM demodulator channels with automatic selection
- User selectable and automatic gain control
- Transparent and stream modes to implement MIFARE™ classic compliant or other custom protocols
- Possibility of driving two antennas in single ended mode
- Oscillator input capable of operating with 13.56 MHz or 27.12 MHz crystal with fast start-up
- 6 Mbit/s SPI with 96 bytes FIFO
- Wide supply voltage range from 2.4 V to 5.5 V
- Wide temperature range: -40 °C to 125 °C
- QFN32, 5 mm x 5 mm package
ISO 18092 (NFCIP-1) initiator, ISO 18092 (NFCIP-1) active target, ISO 14443A and B reader (including high bit rates), ISO 15693 reader and FeliCa™ reader.
- Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 64 MHz
- -40°C to 85°C operating temperature
- Memories – 128 Kbytes of Flash memory – 36 Kbytes of SRAM (32 Kbytes with HW parity check)
- Including 3DES AES Soft algorithm encryption Support Ultralight C,MIFARE™ Plus,Desfire Read Write
Communication setting
- The communication protocol is byte oriented.
- Both sending and receiving bytes are in hexadecimal format.
- The communication parameters are as follows,
- Baud rate: 19200 bps
- Data: 8 bits
- Stop: 1 bit
- Parity: None
- Flow control: None
Dimensions & Other Description
| Name | CR9506 series Proximity Reader | |||
| Weight | 240g | |||
| Dimensions | 110*80*26 (mm) | |||
| Temperature | -40 ~ +85℃ | |||
| Interface | USB Virtual RS232 ,RS232 | |||
| Read Range | up to 8cm | |||
| Frequency | 13. 56MHz | |||
| Support | ISO14443A | |||
| MIFARE® 1K，MIFARE®4K, MIFARE Utralight®, MIFARE® DESFire,MIFARE® Pro，
Ntag, MIFARE Utralight®C,SLE66R35,Fm1108,TYPE A CPU card 25TB512 ,25TB04K,25TB176 ISO15693 I.code SLIx, I.code SLIs ,TI2k ,TI256,ST25TV512/2k/04K ,ST25DV512/2k/04K
|
||||
| Power Requirement | DC 5V ,70ma - 100ma | |||
| MCU | Core: ARM® 32- bit CortexTM -M0 CPU | |||
| CR522A | CR523B | CR6085A | CR9506 | |
| ISO14443A | ✔ | ✔ | ✔ | |
| ISO14443B | ✔ | ✔ | ||
| ISO15693 | ✔ |
CR9506 Serials&Similar Part Number Description
| Model | Description | Interface & Others |
| CR522A/B | MIFARE® S50/S70,Ultralight®,FM1108,TYP
25TB512 ,25TB04K,25TB176 |
UART DC
4.5~5.5V |
| CR9506 | MIFARE® 1K/4K,Ultralight®,Ultralight®C,Mifare®Plus FM1108,TYPE
A.Ntag,SLE66R01P,NFC typeA tags l.code sliTi 2k , SRF55V01, SRF55V02 ,SRF55V10,LRI 2k,ISO15693 STD 25TB512 ,25TB04K,25TB176 |
4.5~5.5V |
| CR3601 | MIFARE® 1K/4K,Ultralight®,Ultralight®C,Mifare®Plus FM1108,TYPE
A.Ntag,SLE66R01P,NFC typeA tags l.code sliTi 2k , SRF55V01, SRF55V02 ,SRF55V10,LRI 2k,ISO15693 STD 25TB512 ,25TB04K,25TB176 |
UART DC
2.6~3.6V |
Similar product Part number reference
| Model | Description | InterFace |
| CR0301A | MIFARE® TypeA reader modulMIFARE® 1K/4K,Ultralight®,Ntag. Sle66R01Pe | UART & IIC2.6~3.6V |
| CR0285A | MIFARE® TypeA reader moduleMIFARE® 1k/4k,Utralight®,Ntag. Sle66R01P | UART OR SPI2.6~3.6V |
| CR0381A | MIFARED TypeA reader moduleMIFARE® S50/S70,Ultralight®.Ntag. Sle66R01P | UART |
| CR0381D | I.code sli,Ti 2k , SRF55V01, SRF55V02 ,SRF55V10,LRI2K,ISO15693 STD | UART DC 5V OR|DC 2.6~3.6V |
| CR8021A | MIFARE®TypeA reader moduleMIFARE® S 50/S70,Ultralight®,Ntag. Sle66R01P | RS232 or UART |
| CR8021D | .code sli.Ti 2k,SRF55V01, SRF55V02 ,SRF55V10,LRI2K,ISO15693 STD | RS232 OR UARTDC3VOR5V |
| CR508DU-K | 15693 UID Hex output | USB EmulationKeyboar |
| CR508AU-K | TYPE A ,MIFARE® UID or Block Data output | USB EmulationKeyboard |
| CR508BU-K | TYPE B UID Hex output | USB EmulationKeyboard |
| CR6403 | TYPEA(MIFARE Plus®,Ultralight® C) + TYPEB+ISO15693 + Smart Card | UART RS232 USB|IC |
| CR6403 | TYPEA(MIFARE Plus®,Ultralight® C)+ TYPEBISO15693 + Smart Card+ | USB RS232 |
| CR9505 | TYPEA(MIFARE Plus®,Ultralight® C)+ TYPEBISO15693 | UART |
COMMENT: MIFARE® and MIFARE Classic® are trademarks of NXP B.V.
Write your message here and send it to us
